Step 1: Pry the small plugs free from the area exposed by the raised back door. There will be 2 of them.
Be careful not to damage the light while you are working these plugs loose.
Step 2: Remove the tail light assembly.
Step 3: Disconnect the wiring harness from the old assembly.
NOTE: If you ordered your replacement tail light from Go-Parts, it likely has all of the bulbs included. This will help to save you steps!
Step 4: Connect the wiring harness to the new tail light assembly and place it in position.
Step 5: Secure the new tail light assembly's position by inserting the plugs we removed in Step 1.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: