Step 2: Loosen and remove the 15mm bolt (1) just above the seat belt's mounting point. You can now lower the seat belt harness.
Step 3: Pry and remove the trim that lines the BOTTOM of the door jamb.
Step 4: Pry and remove the trim that lines the TOP of the door jamb.
Step 5: Pry and remove the trim that lines the SIDE of the door jamb.
Step 6: Using the flathead screwdriver, pry and disengage the retaining pin (1) that secures the assembly to the window.
Step 7: Loosen and remove the 10mm bolts (3) that secure the motor assembly to the vehicle. Disconnect the assembly's wiring harness (1).
Step 8: Connect the wiring harness (1) to the new motor assembly. Secure it to the vehicle by tightening the 10mm bolts (3).
Step 9: Engage the retaining clip (1) to secure the assembly to the window.
Step 10: Reattach the trim panels (3).
Step 11: Secure the seatbelt assembly by tightening the 10mm bolt (1).
These Part Change / Installation Instructions Apply to
08 2008, 07 2007, 06 2006, 05 2005, 04 2004, 03 2003, 02 2002, 01 2001 Chrysler, Dodge Caravan, Town and Country Rear Power Vent Window Motor Replacement Instructions