Step 2: Remove the two T25 retaining screws that hold the assembly in place.
These screws are located in the area exposed by the lowering of the tailgate.
Step 3: Remove the tail light assembly from the vehicle.
Step 4: Disconnect the wiring harness from the back of the old tail light assembly.
Step 5: Connect the wiring harness to the back of the new tail light assembly.
Step 6: Move the new assembly into place, using the guidance tabs to ensure proper placement.
Step 7: Tighten the T25 retaining bolts to secure the new tail light into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: