Step 2: Release the retaining tabs (2) on either side of the glove compartment to release the door/box from the dashboard.
These clips are released by depressing the tab and pulling the retaining pin from the assembly. The glove compartment will remain connected at the BOTTOM, but swing down, exposing the air filter assembly.
Step 3: Release the retaining tab (1) that hold the cabin air filter cover to the dashboard.
Step 4: You can now remove the cabin air filters (2) from the vehicle.
NOTE: You can pull the first air filter from the assembly, but must slide the tab on the bottom of the casing to the LEFT to remove the second one.
Step 5: Remove both filters from the plastic trays.
Step 6: Insert the new air filters (2) into the plastic trays.
NOTE: Be sure that the arrows are pointing DOWN when they are inserted into the trays.
Step 7: Insert the cabin air filter trays (2) into the assembly.
Step 8: Reattach the cabin air filter door, and secure it by re-engaging the retaining tab (1).
Step 9: Reattach the glove compartment by re-engaging the retaining clips (2).
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: