Step 2: Remove the Phillips screw that holds the trunk net hook in place.
Step 3: Gently pull back the interior trunk liner.
Step 4: Remove the three 10mm retaining bolts.
Step 5: Disconnect the wiring harness that connects to the back of the tail light assembly.
Step 6: You can now remove the tail light assembly from the vehicle.
NOTE: If your new assembly includes bulbs, you won't need to worry about removing the sockets/bulbs from the old assembly. However, if it doesn't, simply twist them counter-clockwise to remove them from the old assembly and attach them to the new one.
Step 7: Tighten the three 10mm retaining bolts to secure the new tail light assembly.
Step 8: Connect the wiring harness to the back of the new tail light assembly.
Step 9: Replace the trunk liner to its original position.
Step 10: Tighten the Phillips screw that holds the trunk's retaining net hook in place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: