How do you Change, Replace, or Install 2002-2009 Chevrolet Trailblazer Engine Idler Pulley Replacement
Click here for all of our other replacement guides
3/8 drive ratchet
Step 1: Open the vehicle's hood.
We recommend accessing a diagram of the belt routing before beginning this installation. Many vehicles have it posted near the radiator, while others will have it in the manual.
Step 2: Using the 3/8 drive ratchet handle, insert the square tab into the opening on the tensioner pulley. Turn it CLOCKWISE to release the tension on the belt.
Step 3: You can now slide the serpentine belt from the vehicle.
Step 4: Loosen and remove the 15mm bolt (1) that secures the idler pulley to the vehicle.
This bolt is located BELOW the alternator's position.
Step 5: You can now remove the idler pulley from the vehicle.
Step 6: Insert the washer into the NEW idler pulley, and mount it by tighten the 15mm bolt (1).
Step 7: Route the belt per the routing diagram, and using the 3/8 drive ratchet handle, tighten the tensioner until the belt it taut.
The belt should be taut, but not stretched or overly tight.
These Part Change / Installation Instructions Apply to
09 2009, 08 2008, 07 2007, 06 2006, 05 2005, 04 2004, 03 2003, 02 2002 Chevrolet Trailblazer Engine Idler Pulley Replacement Instructions
- POPULAR GUIDES: CHEVROLET TRAILBLAZER -
Chevrolet Trailblazer, GMC Envoy Engine Fan, Serpentine Belt Replacement
2002-2009 Chevrolet Trailblazer AC Heater Fan Speed Control Resistor Replacement
2002-2009 Chevrolet Trailblazer Fog Light Replacement
2002-2009 Chevrolet Trailblazer Side Mirror Replacement
2002-2009 Chevrolet Trailblazer Tail Light Replacement
2002-2008 Chevrolet Trailblazer AC Heater Blower Motor Replacement
2002-2006 Chevrolet Trailblazer Serpentine Belt Replacement
2002-2005 Chevrolet Trailblazer Radiator Grille Replacement
2002-2005 Chevrolet Trailblazer Serpentine Belt Tensioner Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
USERNAME (Your E-Mail)
Enter email address here: