Step 1: From underneath the vehicle, disconnect the wiring harness attached to the back of the fog light assembly.
Step 2: Using the 10mm socket/ratchet, loosen and remove the three retaining bolts that secure the fog light assembly in place.
Step 3: You can now remove the fog light assembly from the vehicle.
You'll remove the fog light through the front of the vehicle.
Step 4: Push the new fog light assembly into place and secure it by tightening the three 10mm retaining bolts.
Step 5: Connect the wiring harness to the back of the fog light assembly.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: