Step 2: Remove the 2 Phillips screws that hold the tail light in place.
These screws are exposed by opening the tailgate.
Step 3: You can now pull the tail light assembly from the vehicle.
Step 4: Disconnect the wiring harness on the back of the assembly.
NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs and a connector plate, as most of our models do. This saves you an installation step! However, if your particular model does not include new bulbs and the connector plate, simply remove the Phillips screws that hold the plate in place, remove the bulbs from the tail light, and attach them to the new one. This process only takes a few moments.
Step 5: Connect the wiring harness to the back of the new tail light assembly.
Step 6: Mount the new tail light to the vehicle.
Use the tabs on the tail light as your guides to ensure proper placement. Tighten the 2 Phillips screws to secure the tail light.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: