Step 2: Remove the retaining clip that holds the trunk liner in place.
This is located near the tail light assembly and requires only pliers.
Step 3: Remove the three 13mm retaining bolts that secure the tail light assembly in place.
Step 4: You can now disconnect the wiring harnesses and remove the tail light assembly from the chassis.
Step 5: Connect the wiring harnesses to the back of the new tail light assembly.
Step 6: Tighten the three 13mm retaining bolts to secure it into place.
Step 7: Re-engage the retaining clip to hold the trunk liner in place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: