Step 1: Pop off the cover located on the interior of the mirror/door connection point.
Step 2: Disconnect the electrical harness that powers the mirror.
Step 3: Using the 10mm socket, remove the 3 bolts that hold the mirror in place.
NOTE: Be sure not to lose the bolts down into the door panel! You may have to remove the panel if you do!
Step 4: Disengage the clip and remove the side mirror.
Step 5: Bolt the new mirror into place.
Step 6: Reconnect the electrical harness.
Step 7: Replace the panel that covers the connection point.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
06 2006, 05 2005, 04 2004, 03 2003 Chevrolet Tahoe Side Mirror Replacement Instructions