Step 1: Locate and disengage the clips that hold your front bumper cover in place. Use your flat head screwdriver to remove the clips, and the Phillips screwdriver to release the final clips.
You will find 5 on the top with the rest located underneath. Some will be located in the tire wells.
Step 2: Remove the 10mm bolts to completely free the bumper cover.
Step 3: Remove the grille and bumper cover from the vehicle.
Step 4: Loosen and remove the five 10mm bolts that hold headlight casing in place.
One will be located on the outer-underside of the casing. The others are located to the interior.
Step 5: With the bolts removed, you can now remove the headlight assembly.
NOTE: If you ordered your replacement headlight assembly from Go-Parts, the part will include new bulbs, so you don't need to remove the bulbs, as new ones are already in place!
Step 6: Disconnect the wiring harnesses that power the headlight.
Step 7: Connect the wiring harnesses to the new headlight assembly and position into place.
Step 8: Using the 10mm socket, tighten the bolts to secure the new assembly.
Step 9: Begin reattaching the front bumper cover, reversing the order in which you removed it. (Details above).
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005, 04 2004, 03 2003 Honda Accord Headlight Replacement Instructions