Step 1: Approaching the fog light from underneath the vehicle, disconnect the fog light's wiring harness.
Step 2: Loosen and remove the 10mm mounting bolts (2) that hold the fog light assembly to the vehicle.
Step 3: You can now pull the fog light assembly through the FRONT of the vehicle.
NOTE: Be sure to check the adjustment screw on your old fog light, and lengthen or shorten the adjustor on the new fog light to match that length. This will ensure proper beam alignment!
Step 4: Insert the new fog light assembly, and secure its position by tightening the 10mm mounting bolts (2).
Step 5: Connect the wiring harness to the back of the fog light assembly.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
These Part Change / Installation Instructions Apply to
05 2005, 04 2004, 03 2003 Saturn Ion Fog Light Replacement Instructions