NOTE: This entire procedure is done on the PASSENGER'S side of the vehicle, just beneath the glove compartment.
Step 1: Loosen and remove the T25 screws (2) that hold the protective panel in place, just below the glove compartment.
Step 2: You can now remove this trim panel from the vehicle.
Step 3: Loosen and remove the T25 screws (4) that secure the cabin air filter cover to the UNDERSIDE of the assembly.
Step 4: You can now pull the cabin air filter (1) from the assembly.
Step 5: Insert the new cabin air filter (1) into the assembly.
Step 6: Secure the cabin filter assembly cover by tightening the T25 screws (4).
Step 7: Reattach the trim panel by tightening the T25 mounting screws (2).
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out:
These Part Change / Installation Instructions Apply to
12 2012, 11 2011, 10 2010, 09 2009, 08 2008, 07 2007, 06 2006, 05 2005, 04 2004, 03 2003 Volvo XC90 Cabin Air Filter Replacement Instructions