Step 2: Lift and release the white tab on the back of the headlight assembly.
Step 3: You can now pull the headlight from the vehicle.
Step 4: Disconnect the wiring harness attached to the back of the headlight.
NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply transfer the bulbs and sockets to the new assembly. This process takes just a few moments! You may need to transfer the wiring, as well.
Step 5: Connect the wiring harness to the new headlight assembly.
NOTE: Lengthen or shorten the alignment screw on the back of the assembly to match that of the old headlight. This will ensure proper beam alignment.
Step 6: Secure the headlight by re-engaging the white retaining clip.
Use the alignment pins to ensure proper installation.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: