Step 1: Locate the blower motor beneath the glove compartment on the passenger's side of the vehicle.
Step 2: Disconnect the wiring harness from the back of the blower motor.
Step 3: Loosen and remove the three 7mm retaining bolts that hold the blower motor in place.
You will need the extension for the retaining bolt in the back of the blower motor.
Step 4: Pull the blower motor from the vehicle.
Step 5: Push your new blower motor into the opening (lining up the triangle guide to ensure proper placement).
Step 6: Mount the blower motor by tightening the three 7mm retaining bolts.
Step 7: Reconnect the wiring harness to the back of the blower motor.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: