How do you Change, Replace, or Install 2004-2010 Toyota Sienna Front Door Handle (Interior) Replacement
Click here for all of our other replacement guides
Step 1: Open the vehicle's door.
Step 2: Pry and remove the small trim panel near the side mirror mount.
Step 3: Pry and remove the trim panel INSIDE the interior door handle. Loosen and remove the Phillips screw (1).
Step 4: Loosen and remove the Phillips screws (2) located inside the interior door pull cup and beneath the arm rest.
Step 5: Using the Phillips screwdriver, remove the Phillips retaining clip (1) located near the door latch.
Step 6: Lift and remove the power window switch plate/arm rest. Disconnect the wiring harness (1).
Step 7: Loosen and remove the Phillips screws (2) exposed in Step 6.
Step 8: You can now pry and separate the interior door panel from the door frame.
A series of retaining clips secures the panel to the door frame. You will hear them "pop" as they disengage.
Step 9: Disengage the locking cables (2) from the BACK of the interior door handle. Disconnect the wiring harness (1).
Step 10: Using the flathead screwdriver, pry and remove the interior door handle through the FRONT of the interior door panel.
Step 11: "Snap" the NEW interior door handle into place on the door panel.
Step 12: Reattach the interior door panel.
Be sure to re-engage the locking cables (2), connect the wiring harnesses (2), and tighten the Phillips screws. Also, reattach all trim panels.
These Part Change / Installation Instructions Apply to
10 2010, 09 2009, 08 2008, 07 2007, 06 2006, 05 2005, 04 2004 Toyota Sienna Front Door Handle (Interior) Replacement Instructions
- POPULAR GUIDES: TOYOTA SIENNA -
2004-2010 Toyota Sienna Side Mirror Replacement
1998-2003 Toyota Sienna Corner Light Replacement
1998-2003 Toyota Sienna Side Mirror Replacement
1998-2003 Toyota Sienna Tailgate Handle Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
USERNAME (Your E-Mail)
Enter email address here: