How do you Change, Replace, or Install 2004-2012 Chevrolet Colorado Engine Serpentine Belt Replacement
Click here for all of our other replacement guides
Step 1: Open the vehicle's hood.
Step 2: Insert the 3/8 ratchet (square end) into the square opening on the belt tensioner.
You may need a larger pipe for leverage if the tensioner is a bit rusted or tight.
Step 3: Turn the tensioner CLOCKWISE to loosen the tensioner, reducing tension on the belt, and allowing for its removal.
Step 4: You can now remove the serpentine belt from the vehicle.
Step 5: Using the diagram provided (usually located on the air box), loop the belt as shown. Be sure that the belt is looped around the proper pulleys!
Step 6: Using the 3/8 ratchet, turn the belt tensioner COUNTER-CLOCKWISE to tighten the belt around the pulleys.
The belt should be taut, but not overly tight. There should be about a 1/4 inch of "play"┬Ł when pushing down on the belt.
These Part Change / Installation Instructions Apply to
12 2012, 11 2011, 10 2010, 09 2009, 08 2008, 07 2007, 06 2006, 05 2005, 04 2004 Chevrolet Colorado Engine Serpentine Belt Replacement Instructions
- POPULAR GUIDES: CHEVROLET COLORADO -
2004-2012 Chevrolet Colorado 4x4 Axle Shift Actuator Replacement
2004-2012 Chevrolet Colorado Engine Air Filter Replacement
2004-2012 Chevrolet Colorado Front Door Handle (Exterior) Replacement
2004-2012 Chevrolet Colorado Front Door Panel (Interior) Replacement
2004-2012 Chevrolet Colorado Ignition Coil Replacement
2004-2012 Chevrolet Colorado Master Power Window Switch Replacement
2004-2012 Chevrolet Colorado Parking Light Replacement
2004-2012 Chevrolet Colorado Tailgate Handle Replacement
2004-2011 Chevrolet Colorado Tail Light Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
USERNAME (Your E-Mail)
Enter email address here: