Step 2: Loosen and remove the 8mm bolts (3) that secure the headlight assembly to the vehicle.
These bolts are located on TOP of the headlight assembly.
Step 3: You can now slide and remove the headlight assembly from the vehicle.
Step 4: Disconnect the wiring harnesses (2) from the back of the headlight assembly.
To disconnect the harnesses, you must slide the RED safety tab, and THEN disconnect the harness.
NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs and sockets, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist and remove the sockets from the old assembly and mount them to the new one.
Step 5: Connect the wiring harnesses (2) to the back of the new headlight assembly.
Step 6: Mount the headlight to the vehicle by tightening the 8mm bolts (3).
These Part Change / Installation Instructions Apply to
07 2007, 06 2006, 05 2005 Chrysler Town & Country Headlight Replacement Instructions