Step 1: Using the T-30 bit, remove the two retaining bolts (upper and lower).
Step 2: Gently remove the assembly from the vehicle.
Step 3: Disconnect the electrical plug that provides power from the vehicle to the lighting assembly.
The flathead screwdriver can assist in the disconnection of the plug, as the tab must be pulled upward, freeing the plug.
Step 4: Reconnect the electrical plug.
Be sure that you hear the tab "snap" into place to secure the connection.
Step 5: Gently press the new tail light assembly into place.
Be sure to align the tabs on the outer edge of the light with the small openings in the vehicle's frame. This ensures a secure and proper fit.
Step 6: Using the T-30 bit, secure your new assembly into place by replacing the retaining bolts.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: