Step 2: Loosen and remove the two 10mm retaining bolts that secure the tail light to the vehicle.
These bolts are exposed by opening the tailgate.
Step 3: You can now pull the tail light assembly from the vehicle.
This will take a firm tug!
Step 4: Disconnect the wiring harness at the bottom of the tail light assembly.
Step 5: Connect the wiring harness to the new tail light assembly.
Step 6: Mount the new tail light by tightening the two 10mm mounting bolts.
Use the guiding tabs to ensure proper positioning of the tail light during installation.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: