Step 2: Loosen and remove the T30 Torx screws (2) that secure the tail light to the vehicle.
Step 3: You can now pull STRAIGHT OUT from the vehicle to remove the tail light assembly.
There are two mounting studs that prevent you from being able to pull sideways on the light!
Step 4: Disconnect the wiring harnesses (2) attached to the back of the tail light.
NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new sockets and bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist and remove the sockets from the old assembly and attach them to the new one.
Step 5: Connect the wiring harnesses (2) to the back of the NEW tail light.
Step 6: Mount the tail light by sliding it into position and tightening the T30 Torx screws (2).
These Part Change / Installation Instructions Apply to
10 2010, 09 2009, 08 2008 Chrysler Town & Country, Dodge Caravan Tail Light Replacement Instructions