How do you Change, Replace, or Install Volvo XC90 Ignition Coil Replacement
Click here for all of our other replacement guides
T25 Torx Driver
T30 Torx Driver
10mm socket/ratchet with extension
Step 1: Open the vehicle's hood.
Step 2: Loosen and remove the T25 Torx screws (2) that secure the tube across the top of the engine.
Step 3: Loosen and remove the T30 Torx screws (8) that secure the valve cover to the engine.
Step 4: Disengage the retaining tab, remove the oil cap, and remove the valve cover panel.
We recommend replacing all of your coils in the same installation process, as they often begin failing in around the same time. However, when replacing them, do so ONE AT A TIME.
Step 5: Loosen the 10mm mounting bolt (1) that secures the ignition coil to the engine.
Step 6: Disconnect the ignition coil's wiring harness (1).
Step 7: You can now remove the ignition coil from the vehicle.
Step 9: Mount the new ignition coil by tightening the 10mm mounting bolt (1).
Step 10: Repeat this process for the remaining ignition coils.
Step 11: Reattach the valve cover panel by removing the oil cap, engaging the retaining tab, replacing the oil cap, and tightening the T30 Torx screws (8).
Step 12: Tighten the T25 Torx screws (2) that secure the tube across the valve cover.
These Part Change / Installation Instructions Apply to
0 Ignition Coil Replacement Instructions
- POPULAR GUIDES: VOLVO XC90 -
2003-2012 Volvo XC90 Cabin Air Filter Replacement
2003-2012 Volvo XC90 Door Handle (Interior) Replacement
2003-2012 Volvo XC90 Engine Air Filter Replacement
2003-2012 Volvo XC90 Front Door Panel (Interior) Replacement
2003-2012 Volvo XC90 Hood Support Strut Replacement
2003-2012 Volvo XC90 Rear Door Panel (Interior) Replacement
2003-2012 Volvo XC90 Tail Light Replacement
2003-2012 Volvo XC90 Upper Rear Reflector Replacement
2003-2011 Volvo XC90 Fog Light Replacement
Shipping & Returns
Toll Free No: 1-877-321-PART
Your cart is completely and totally empty!
Enter email address here: