Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.
Wrenchy
Go-Parts Garage
Expert guides for diagnosing, troubleshooting, and replacing auto parts Expert guides for diagnosing and replacing auto parts
Browse All Articles →
🎬 Helpful Videos 🛍️ Shop This Part

A Guide to the Engine Oil Pressure Switch on Your 2009-2014 Nissan Cube

Understanding the red oil light on your dashboard and what it means for your Cube's engine.

3 minutes to read 2009-2014 Nissan Cube
Difficulty
1/5
Est. Time
0.5 hrs
DIY Doable?
✅ Yes
Shop Labor
$50-$100
⚠️ Drivable, but... — Only drive after you have confirmed the engine oil level is full, and only drive directly to a repair shop or to get the part.
Key Takeaways
  • If the oil light comes on, always check your oil level immediately before driving further.
  • A faulty switch is a common, inexpensive cause for a false oil light on the Cube, but the risk of actual low oil pressure means you must not ignore it.
  • The OEM part number is 25240-4M40E, and quality aftermarket brands like Standard Ignition and Beck Arnley are reliable alternatives.
  • Replacing the switch is a simple, DIY-friendly job that takes less than 30 minutes with basic tools.
The engine oil pressure switch on your 2009-2014 Nissan Cube is a simple but vital sensor. Its only job is to monitor your engine's oil pressure. If the pressure drops below a safe level, this switch sends a signal to illuminate the red oil can warning light on your instrument cluster. It works like a simple on/off light switch; it does not provide a variable pressure reading to a gauge. This part is crucial for giving you an early warning of a potential engine-threatening problem.

Your First Step: The Red Oil Light is On

STOP! Do not ignore this light. The first thing you must do is safely pull over and turn off the engine. The light could mean you have a cheap, faulty sensor, or it could mean your engine is seconds away from catastrophic failure due to no oil pressure. Check your engine oil level using the dipstick. If the oil level is low, you have a problem that needs immediate attention (like an oil leak or excessive consumption) and you should not run the engine. If the oil level is full, the problem is most likely the oil pressure switch itself or a more complex issue with the oil pump or system blockages.

Symptoms of a Failing Oil Pressure Switch

A faulty oil pressure switch can give false warnings that create a lot of stress. Since the Nissan Cube doesn't have a history of major oil pressure problems, the switch is a likely culprit if your oil level is correct. Common symptoms include:

  • Oil light flickers: The light may flicker, especially at idle or when 🎬 Watch: 7 reasons your oil light flickers at idle the engine temperature changes.
  • Oil light is on constantly: The warning light stays on even when you know the oil level and pressure are fine.
  • Oil light is off when it should be on: The light doesn't illuminate briefly when you first turn the key before starting the engine.
  • Oil leaking from the switch: The switch itself can fail and leak oil. You may see oil residue on or around the sensor.

Choosing the Right Aftermarket Switch

For a simple part like an oil pressure switch, an aftermarket replacement is a perfectly reasonable choice for your Nissan Cube. The OEM part is reliable, but quality aftermarket brands offer similar performance for less money. Here's a look at the brands available:

  • Premium Aftermarket (Good reputation for sensors): Brands like Standard Ignition (SMP) and Beck Arnley are well-regarded in the industry. Beck Arnley specializes in import vehicles and often sources parts from OEM manufacturers. Standard Ignition is a trusted name for all types of engine management sensors.
  • Quality Alternatives: Brands like Vemo and Facet are European companies that produce a wide range of OE-equivalent parts and are generally considered reliable options. Rostra Powertrain is another established aftermarket manufacturer.
Pro Tip: Given the low cost of even the premium aftermarket options, it's worth spending a few extra dollars for a brand with a strong reputation for electronic components to avoid having to do the job twice.

Cost Comparison for a New Oil Pressure Switch

Part Type Price Range
New OEM (Nissan) $27 - $39
New Aftermarket $14 - $41
Shop Labor $50 - $100

Frequently Asked Questions (FAQ)

Where is the oil pressure switch located on a 2009-2014 Nissan Cube?

The oil pressure switch is located on the engine block of the 1.8L (MR18DE) engine. You will typically find it screwed into the block, often near the oil filter, with 🎬 See this video for the exact sensor location and replacement a single electrical connector attached.

Can I replace the oil pressure switch myself?

Yes, this is a very DIY-friendly job for most home mechanics. It requires basic tools, primarily a deep socket wrench to fit the switch. The process 🎬 Watch: How to replace the switch using basic hand tools involves unplugging the electrical connector, unscrewing the old switch, and screwing in the new one. Be prepared for a small amount of oil to drip out when you remove the old switch.

Are there any recalls or TSBs for the Cube's oil pressure switch?

No. There are no active recalls or widely published Technical Service Bulletins (TSBs) from Nissan specifically for a faulty engine oil pressure switch on the 2009-2014 Cube.

Should I use thread sealant on the new switch?

Many new oil pressure switches come with a thread sealant pre-applied. If your new switch has this, you do not need to add more. If it does not, a small amount of thread sealant appropriate for oil and gas (like Teflon paste) is recommended to prevent leaks.

How to Replace Oil Pressure Switch 2007-2012 Nissan Versa
How to Replace Oil Pressure Switch 2007-2012 Nissan Versa
Engine Oil Pressure Switch Nissan Cube 2.0L 2009-2014 Location and Replacement
Engine Oil Pressure Switch Nissan Cube 2.0L 2009-2014 Location and Replacement
Oil Light Blinking When Idling - 7 Causes & Solutions
Oil Light Blinking When Idling - 7 Causes & Solutions
Oil Light Flashing  in Car while Driving
Oil Light Flashing in Car while Driving
Oil Pressure Switch Replacement with Basic Hand Tools 1080HD
Oil Pressure Switch Replacement with Basic Hand Tools 1080HD

Technical Specifications

OEM Part Numbers: 25240-4M40E 25240-4M400

The oil pressure switch for the 2009-2014 Nissan Cube is a single-pin sensor that activates the dashboard warning light.

Wrenchy
Article researched & written by
Go-Parts' AI research assistant. Every article is backed by live web research, verified OEM data, and real technician knowledge — so you get accurate, up-to-date information you can trust.
Meet Wrenchy → Updated Apr 19, 2026

The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.

Year Coverage
This article covers the Engine Oil Pressure Switch for:
  • Nissan Cube: 200920102011201220132014
In this article
🎬 Helpful Videos
Jump to ▴

Email This Guide

We'll send you a link to this article so you can read it later or share it.

Added to cart · Part