Dodge Attitude Engine Oil Pressure Switch: A Complete Replacement Guide for 2012-2021 Models
Is your oil light on? This small, inexpensive sensor is often the cause.
- First, identify if your Attitude is based on a Hyundai Accent (2012-2014) or Mitsubishi Mirage (2015-2021) to ensure you buy the correct part.
- Always check your engine oil level with the dipstick before assuming the sensor is bad.
- A flickering or illuminated oil light should never be ignored; stop driving and diagnose the issue to prevent engine damage.
- Aftermarket brands like Standard Ignition offer a reliable and affordable alternative to OEM parts for this repair.
Is Your Attitude a Hyundai or a Mitsubishi?
Before buying any parts for your 2012-2021 Dodge Attitude, you must know which car it is based on. Dodge used two different manufacturers for this vehicle, and the parts are not interchangeable.
- 2012-2014 Models: Your Attitude is likely a rebadged Hyundai Accent. Many of these even kept the Hyundai logo on the grille and trunk.
- 2015-2021 Models: Your Attitude is likely a rebadged Mitsubishi Mirage G4 sedan. These models typically have a Dodge crosshair grille.
Confirming your vehicle's origin is the most important step to getting the right part.
Symptoms of a Failing Oil Pressure Switch
A bad oil pressure switch can create a lot of worry, but the part itself is usually an easy fix. The most confusing part is that a bad switch can mimic the signs of real, serious engine trouble. Here’s how to tell the difference.
- Flickering Oil Light: The oil light may flash intermittently, especially at idle, during sharp turns, or when braking hard. This can happen when a faulty sensor's internal components make a poor connection.
- Oil Light Stays On: The most common symptom is the red oil pressure light turning on and staying on, even when the engine oil level is full. This happens when the sensor fails completely and sends a constant warning signal.
- Incorrect Gauge Reading: If your Attitude has an oil pressure gauge, it might read zero, max out completely, or jump around erratically.
- Visible Oil Leak: The plastic body of the sensor can crack with age, or the seal can fail. This will cause a slow oil drip from the sensor itself. You might notice a small puddle under the car or smell burning oil if it drips onto the hot engine or exhaust.
First, Check Your Oil! Before assuming the switch is bad, always turn off the engine and check the oil level with the dipstick. A flickering or solid oil light is the proper function of the switch if your oil level is actually low. Driving with low oil can destroy your engine.
Choosing the Right Aftermarket Part
For a simple part like an oil pressure switch, an aftermarket replacement is a cost-effective choice. Quality is still important, as a poorly made switch can fail quickly or leak.
- Standard Ignition: This is a well-known aftermarket brand with a long history of producing reliable electronic parts and sensors. They are generally considered a safe and dependable option for replacement parts and manufacture many of their components in North America.
- True Tech: There is very little public information available about the quality or reputation of the True Tech brand for auto parts. Most search results refer to repair shops with the same name.
Cost of Replacing an Engine Oil Pressure Switch
| Part Type | Estimated Cost |
|---|---|
| New Aftermarket | $14.92 - $46.39 |
| New OEM (Hyundai/Mitsubishi) | $40 - $75 |
| Shop Labor | $50 - $100 |
Frequently Asked Questions
Can I replace the oil pressure switch myself?
Yes, this is a DIY-friendly job for most home mechanics. The main challenge is accessing the switch, which is usually screwed into the engine block, often near the oil filter. You will need a special deep socket for oil pressure switches, a ratchet, and possibly a universal joint or extension to reach it. The job typically takes less than an hour.
My oil light is on. Is it a bad switch or low oil pressure?
First, check the oil level. If it's full, the switch is the most likely culprit. A mechanic can confirm this by connecting a mechanical pressure gauge to the engine to test the actual oil pressure. If the pressure is good but the light is on, the switch is bad. If the pressure is actually low, you have a more serious problem like a failing oil pump.
Are there any recalls for this part on the Dodge Attitude?
No specific recalls or Technical Service Bulletins (TSBs) were found for the engine oil pressure switch on the 2012-2021 Dodge Attitude. The vehicle is not listed in the main US-based NHTSA database, as it was primarily sold in Mexico.
What happens if I ignore the oil light?
Do not ignore the light. If the light is on because of a faulty switch, you won't know if a real oil pressure problem develops. If the light is on because of actual low oil pressure, continuing to drive can lead to catastrophic engine failure within minutes.
Technical Specifications
OEM Part Numbers: 9475002100
The OEM part number 9475002100 corresponds to the Hyundai-based Dodge Attitude with the 1.4L engine. Part numbers for the Mitsubishi-based models will differ. Always verify the part by your vehicle's VIN.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Dodge Attitude: