Start Here

How do you Change, Replace, or Install Broken 1992-1994 Toyota Camry Tail Light Replacement

Fits years: 1992, 1993, 1994

All Toyota Camry Tail Lights for sale Tools required:
  • Phillips screwdriver

  • 8mm socket/ratchet

Step 1: Open the vehicle's trunk.

Step 2: Remove the two Phillips retaining screws just to the inside of the tail light assembly.

Step 3: Remove the pins that hold the trunk liner in place and pull it back, exposing the rear of the tail light assembly.

Step 3: You can now remove the tail light assembly from the vehicle.

Step 4: Disconnect the wiring harness to fully remove the assembly.

Step 5: Feed the wiring of the new tail light assembly through the opening, and attach it to the vehicle by tightening the Phillips retaining screws. Connect the wiring harness to the new tail light assembly.

NOTE: If your assembly comes with the mounting bracket, you will want to remove the 8mm retaining bolts that hold the old bracket in place.

Step 6: Tighten the retaining bolts of the new bracket (if necessary).

Step 7: Replace the trunk liner pins and cover the rear of the tail light assembly.
These Part Change / Installation Instructions Apply to:

92 1992, 93 1993, 94 1994 Toyota Camry Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.