Start Here

How do you Change, Replace, or Install Broken 1992-1994 Toyota Camry Turn Signal Replacement

Fits years: 1994

All Toyota Camry Turn Signal Lights for sale Tools required:
  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Loosen and remove the Phillips screw located on the outside of the turn signal.

Step 2: Using the flathead screwdriver, gently pry the "back-half" of the marker light free of the vehicle.

Step 3: Loosen and remove the Phillips screw that is exposed by removing the side marker portion of the light.

Step 4: You can now pull the turn signal light from the vehicle.

Step 5: Disconnect the wiring harness on the back of the turn signal assembly.

NOTE: If you ordered your replacement turn signal from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply turn the socket counter-clockwise, remove the socket from the old assembly, and attach it to the new one. This process only takes a few moments!

Step 6: Connect the wiring harness to the new turn signal.

Step 7: Secure the turn signal by tightening the Phillips screw.

Step 8: Reattach the side marker light by tightening the outer Phillips screw.
These Part Change / Installation Instructions Apply to:

94 1994 Toyota Camry Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.