Start Here

How do you Change, Replace, or Install Broken 1993-1997 Jeep Grand Cherokee Turn Signal Replacement

Fits years: 1993, 1994, 1995, 1996, 1997

All Jeep Grand Cherokee Turn Signal Lights for sale Tools required:
  • T2 Torx socket/driver

Step 1: Locate the retaining screw between the marker light and the headlight and remove it.

Step 2: Remove the retaining screw that is located just above the marker light casing.

Step 3: Remove the lower retaining screw that is beneath the marker light.

Step 4: You can now pull the marker light from the vehicle.

Step 5: Behind the marker light, you will find two more retaining screws. Loosen and remove them.

Step 6: You can now pull the turn signal casing from the vehicle.

Step 7: Disconnect the wiring harness on the back of the turn signal assembly.

Step 8: Connect the wiring harness to the back of the new turn signal and put it into place.

Step 9: Secure the turn signal assembly by tightening the two retaining bolts.

Step 10: Secure the marker light, and tighten the retaining screws that hold the assemblies in place.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994, 95 1995, 96 1996, 97 1997 Jeep Grand Cherokee Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
13 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.