Start Here

How do you Change, Replace, or Install Broken 1993-1998 Jeep Grand Cherokee Corner Light Replacement

Fits years: 1993, 1994, 1995, 1996, 1997, 1998

All Jeep Grand Cherokee Turn Signal Lights for sale Tools required:
  • T2 Torx Driver

Step 1: From the front of the vehicle, loosen and remove the T2 Torx screws that hold the marker assembly in place.

One T2 screw is located beneath the headlight (between the headlight and turn signal), while the other is located between the side marker light and the headlight.

Step 2: You can now pull the marker light from the vehicle.

Step 3: Disconnect the wiring harness from the marker light.

Some models may require turning the socket counter-clockwise and removing it from the old assembly. If this is the case, simply insert it into the new assembly.

Step 4: Connect the wiring harness to the new marker light assembly.

Step 5: Mount the side marker light by tightening the two T2 mounting screws.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994, 95 1995, 96 1996, 97 1997, 98 1998 Jeep Grand Cherokee Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
13 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.