Start Here

How do you Change, Replace, or Install Broken 1993-2010 Ford Ranger Side Mirror Replacement

Fits years: 1993, 1994

All Ford Ranger Mirrors for sale Tools required:
  • Phillips screwdriver

  • Flathead screwdriver

  • 6mm socket/ratchet

  • 11mm socket/ratchet

  • 8mm wrench

Step 1: Using the 8mm wrench, disconnect your negative battery cable.

Step 2: Locate and remove the two Phillips screws inside the interior door handle.

Step 3: Pull the interior door handle away from the interior door panel and disconnect the wiring harnesses.

You may need to use your flathead screwdriver to release the tabs that secure the wiring harnesses. You will also need to unscrew the mounting screws that attach the window switch to the interior door panel.

Step 4: Proceed with removing the interior door panel.

Step 5: With the interior door panel removed, gently remove the plastic water guard without tearing it. (We'll need to reattach it later!)

Step 6: If necessary, remove the speaker using your 6mm socket/ratchet and disconnect the wiring harness.

Step 7: Disconnect the wiring harness from your mirror.

Step 8: Remove the three 11mm retaining bolts.

Step 9: Remove the side mirror from the vehicle.

Step 10: Attach your new side mirror to the vehicle by tightening the 11mm retaining bolts and feeding the electrical harness down into the interior of the door.

Step 11: Connect the wiring harness to ensure power to the mirror.

Step 12: If necessary, reattach/reconnect the speaker.

Step 13: Reattach the interior door panel by simply reversing the removal process.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994 Ford Ranger Mirrors Replacement Instructions

Average Rating: 4.8 of 5 stars
48 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.