Start Here

How do you Change, Replace, or Install Broken 1995-1996 Toyota Camry Corner Light Replacement

Fits years: 1995, 1996

All Toyota Camry Turn Signal Lights for sale Tools required:
  • Flathead screwdriver

  • Phillips screwdriver

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the Phillips screw (1) that holds the side marker assembly in place.

This screw is located just above where the headlight and side marker light assemblies meet.

Step 3: You can now pull and remove the side marker light from the vehicle.

Step 4: Disconnect the wiring harness attached to the back of the marker light assembly.

NOTE: If you ordered your replacement side marker assembly from Go-Parts, it likely includes a new bulb, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist the socket counter-clockwise to pull it from the old assembly and attach it to the new one. This process takes just a few moments!

Step 5: Connect the wiring harness to the new side marker light assembly.

Step 6: Mount the new side marker light by tightening the Phillips retaining screw (1).

Use the guiding tabs on the assembly to ensure proper placement and installation.
These Part Change / Installation Instructions Apply to:

95 1995, 96 1996 Toyota Camry Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.