Start Here

How do you Change, Replace, or Install Broken 1995-2005 Chevrolet Cavalier Front Door Panel (Interior, Manual Windows) Replacement

Fits years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

All Chevrolet Cavalier for sale Tools required:
  • Phillips screwdriver

  • Window Crank Removal Tool


Step 1: Open the vehicle's door.

Step 2: Loosen and remove the Phillips screw (1) near the DOOR LATCH side of the panel.

Step 3: Loosen and remove the Phillips screws (3) along the BOTTOM edge of the panel.

Step 4: Loosen and remove the Phillips screws (2) inside the interior door pull cup.

Step 5: Loosen and remove the Phillips screw (1) near the side mirror mount. Remove the trim panel.

Step 6: Using the window crank removal tool, pry and remove the window crank lever.

Step 7: Starting near the side mirror mount, work your way around the outer edge of the door panel, pulling outward. You should hear the retaining clips "pop" as they disengage.

Step 8: You can now LIFT and remove the interior door panel.

Step 9: To reattach the door panel, simply slide it into place on the door frame, and using a FIRM, but not too firm, strike near each retaining clip, "snap" them back into place.

Step 10: Reattach the trim panel near the side mirror mount. Tighten the Phillips screw (1).

Step 11: Tighten the Phillips screws (2) inside the interior door pull cup.

Step 12: Tighten the Phillips screws (4) along the bottom edge and latch edge of the panel.

Step 13: Reattach the manual window crank lever.
These Part Change / Installation Instructions Apply to:

95 1995, 96 1996, 97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Chevrolet Cavalier Replacement Instructions

Average Rating: 5 of 5 stars
11 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.