Start Here

How do you Change, Replace, or Install Broken 1995-2005 Ford Explorer AC Heater Blower Motor

Fits years: 1995, 1996, 1997, 1998, 1999, 2000

All Ford Explorer Blower Motors for sale Tools required:
  • 8mm socket/ratchet with extension

  • 10mm socket/ratchet with extension

  • 11mm socket/ratchet with extension

  • Flathead screwdriver

Step 1: Lift the vehicle's hood.

Step 2: Near the passenger's side, remove the small Servo motor by loosening and removing the 10mm bolts that hold it into place.

Step 3: Lift and remove the Servo motor from its position.

Step 4: Remove the airbox by disengaging the retaining clips and pulling it up and out from its position. Remove the air filter, as well.

NOTE: While you are performing this task, it's a good idea to purchase a new air filter, as you already have the components disengaged!

Step 5: You can pull the lower airbox from its location by popping it out from the rubber retaining grommets. You may need to use a flathead screwdriver for leverage.

Remove the rubber grommets from the airbox and put them back into their respective openings in the fender.

Step 6: Remove the 4 retaining bolts that hold the washer and radiator reservoirs in place.

They are 10mm and 11mm bolts.

Step 7: Gently lift the reservoirs up and slide them to the side as much as possible. This helps to give you more room to work!

Step 8: Disconnect the wiring harness that attaches to your blower motor.

Step 9: Remove the tube that attaches near the wiring harness.

Step 10: Remove the four 8mm retaining bolts that hold the blower motor in place.

Step 11: You can how remove the blower motor from the vehicle.

Step 12: Move your new blower motor into place and secure it by tightening the four 8mm retaining bolts.

Step 13: Reconnect the wiring harness and reattach the rubber tube.

Step 14: Reattach the wiper and radiator reservoirs by tightening the retaining bolts.

Step 15: Reattach the lower airbox and place your air filter inside of it.

Step 16: Reattach the upper airbox cover by re-engaging the retaining clips.

Step 17: Secure the Servo motor by tightening the retaining bolts.
These Part Change / Installation Instructions Apply to:

95 1995, 96 1996, 97 1997, 98 1998, 99 1999, 00 2000 Ford Explorer Blower Motors Replacement Instructions

Average Rating: 4.9 of 5 stars
15 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.