Start Here

How do you Change, Replace, or Install Broken 1996-2002 Toyota 4Runner Front Signal Light Replacement

Fits years: 1999, 2000, 2001, 2002

All Toyota 4Runner Turn Signal Lights for sale Tools required:
  • Flathead screwdriver

  • Phillips screwdriver

Step 1: From beneath the vehicle, disconnect the turn signal's wiring harness.

Step 2: Loosen and remove the 2 Phillips retaining screws that hold the turn signal assembly in place.

These screws are located on each side of the assembly.

Step 3: You can now pull the turn signal assembly from the vehicle.

Step 4: Using the flathead screwdriver, remove the small retaining clips that likely stayed with the vehicle when removing the assembly.

These clips are often included with our new assemblies, so you won't need the old ones!

Step 5: Move the new turn signal assembly into position. You will feel the retaining clips "snap" into place.

Step 6: Secure the assembly by tightening the 2 Phillips retaining screws.

Step 7: Connect the turn signal assembly's wiring harness.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002 Toyota 4Runner Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
17 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.