Start Here

How do you Change, Replace, or Install Broken 1997-1998 Chevrolet Venture, Pontiac Montana Serpentine Belt Replacement

Fits years: 1997, 1998

All Chevrolet Venture for sale Tools required:

  • 3/8 Drive ratchet handle

Step 1: Open the vehicle's hood.

Step 2: Locate the belt routing diagram located near the radiator, near the belt pulleys, or in the owner's manual.

Step 3: Using the 3/8 drive ratchet, insert the square peg into the belt tensioner and turn it COUNTER CLOCKWISE to release the tension on the serpentine belt. You can now remove the belt from the vehicle.

Step 4: Using the diagram we located in Step 2, route the new serpentine belt around the proper pulleys.

Step 5: Once the serpentine belt is in place, use the 3/8 drive ratchet handle to turn the tensioner CLOCKWISE. This will tighten the belt, securing its position around the pulleys.

NOTE: The belt should be taut, but not overly tight or stretched!
These Part Change / Installation Instructions Apply to:

97 1997, 98 1998 Chevrolet Venture Replacement Instructions

Average Rating: 4.9 of 5 stars
40 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.