Start Here

How do you Change, Replace, or Install Broken 1997-2002 Ford Expedition Headlight Assembly Replacement

Fits years: 1997, 1998, 1999, 2000, 2001, 2002

All Ford Expedition Headlights for sale Tools required:
  • T-20 Torx driver

Step 1: Locate and disengage the two clips on top of the headlight assembly.

Step 2: Using the T-20 Torx driver, remove the parking light.

This step may not be necessary, as you can remove the headlight by pulling straight forward.

Step 3: Remove the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harness to completely remove the headlight assembly.

Step 5: Connect the wiring harness to the new headlight assembly.

Adjust the "adjustors" on the new assembly to match the length of those on the old one. This will keep your headlights angled perfectly!

NOTE: If you ordered your replacement headlight from Go-Parts, it may have all of the bulbs intact. If so, you won't need to remove the bulbs from the old assembly!

Step 6: Insert the new headlight assembly into place.

You will feel it "snap" into place when properly located.

Step 7: Reattach the parking light using the T-20 driver.

Step 8: Reconnect the clips on the top of the headlight assembly.
These Part Change / Installation Instructions Apply to:

97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Ford Expedition Headlights Replacement Instructions

Average Rating: 4.8 of 5 stars
14 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.