Start Here

How do you Change, Replace, or Install Broken 1997-2002 Ford Expedition Tail Light Replacement

Fits years: 1997, 1998, 1999, 2000, 2001, 2002

All Ford Expedition Tail Lights for sale Tools required:
  • 7mm socket/ratchet (or T20 Torx Driver)

Step 1: Open the vehicle's tailgate.

Step 2: Remove the two 7mm bolts located just above the tail light assembly.

Step 3: You can now remove the tail light assembly from the vehicle.

To remove the tail light, pull outward, in a diagonal line.

Step 4: Disconnect the wiring harnesses from the back of the tail light assembly.

NOTE: If you ordered your replacement tail light assembly from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not include new bulbs, simply turn the sockets counter-clockwise, remove them, and attach them to the new assembly. This only takes a few moments!

Step 5: Connect the wiring harnesses to the new tail light assembly.

Step 6: Mount the new tail light by using the guiding pins to ensure proper placement and tightening the 7mm bolts.
These Part Change / Installation Instructions Apply to:

97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Ford Expedition Tail Lights Replacement Instructions

Average Rating: 4.8 of 5 stars
14 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.