Start Here

How do you Change, Replace, or Install Broken 1997-2003 Pontiac Grand Prix Door Panel Removal

Fits years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

All Pontiac Grand Prix for sale Tools required:

  • Flathead screwdriver

  • Torx driver/Phillips head screwdriver (contingent on vehicle type)

  • Putty knife or door panel clip tool

Step 1: Using the flathead screwdriver, pry the "control panel" loose.

Removing the window/lock control panel is simple, as it will "pop" loose with a bit of prying. Be careful, however!

Step 2: Unplug all of the electrical connections on the back of the panel.

Step 3: Remove the two plastic covers found below the door handle, and remove the screws behind them.

Using a Torx head, you can unscrew the screws found behind the panels.

Step 4: Using either the "clip tool" or a putty knife, begin separating the attaching clips from the door.

These clips are not visible from the outside. Instead, you must slide the tool between the panel and the door frame, and slide it until you hit something. Once you do, gently pry the door back from the frame, and it will "pop" off. BE CAREFUL NOT TO BREAK ANY OF THE CLIPS!

Step 5: Disconnect the remaining plugs (attached to the speaker and door light).

The panel is now free of the vehicle.

NOTE: Be sure to double-check the attaching clips, as wear and tear can take a toll. They are easily replaced if you find that they require it.
These Part Change / Installation Instructions Apply to:

97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003 Pontiac Grand Prix Replacement Instructions

Average Rating: 4.8 of 5 stars
26 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.