Start Here

How do you Change, Replace, or Install Broken 1997-2004 Dodge Dakota, Durango Parking Light Replacement

Fits years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

All Dodge Dakota for sale Tools required:
  • T10 Torx Driver

Step 1: Remove the protective gasket that separates the headlight assembly and the radiator area.

Disengage the mounting pins to pull it back.

Step 2: Locate and remove the T10 Torx screw that mounts the parking light into place.

This screw is located between the headlight and the parking light when facing the vehicle.

Step 3: You can now pull the parking light from the vehicle.

Step 4: Disconnect the wiring harnesses from the back of the parking light assembly.

You may need to twist and remove the bulbs from the assembly if the new assembly does not have bulbs included.

Step 5: Connect the wiring harnesses to the back of the new parking light assembly.

Step 6: Mount the new parking light assembly by tightening the T10 Torx retaining screw.

Step 7: Reattach the protective gasket using the mounting clips.
These Part Change / Installation Instructions Apply to:

97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Dodge Dakota Replacement Instructions

Average Rating: 4.9 of 5 stars
19 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.