Start Here

How do you Change, Replace, or Install Broken 1998-2001 Dodge Intrepid Headlight Replacement

Fits years: 1998, 1999, 2000, 2001

All Dodge Intrepid Headlights for sale Tools required:
  • 6.5mm socket/ratchet (7mm may also work)

  • Phillips screwdriver/Torx driver for headlight alignment

Step 1: Lift the vehicle's hood.

Step 2: Remove the two 6.5mm bolts on the top of the headlight assembly.

Step 3: You can now lift and remove the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses on the back of the headlight assembly.

NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs and sockets, as most of our models do. However, in case it doesn't, simply turn the sockets counter-clockwise to remove them from the old assembly and add them to the new one.

Step 5: Adjust the two adjustor rods that protrude from the back of the assembly.

We recommend measuring the distance of the adjustors on the old headlight assembly and getting the new adjustors as close to that length as possible.

Step 6: Connect the wiring harnesses to the back of the new headlight assembly.

Step 7: Mount the new headlight assembly by using the guiding pins for position and tightening the two 6.5mm retaining bolts into place.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001 Dodge Intrepid Headlights Replacement Instructions

Average Rating: 4.8 of 5 stars
26 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.