Start Here

How do you Change, Replace, or Install Broken 1998-2001 Nissan Altima Tail Light Replacement

Fits years: 1998, 1999, 2000, 2001

All Nissan Altima Tail Lights for sale Tools required:
  • 8mm socket with extension

Step 1: Remove the thumbscrew that keeps your trunk liner in place (on the interior of the taillight).

Step 2: With the bulb sockets now exposed, you can change the bulbs by unscrewing the socket from the back and pulling it from the casing.

NOTE: If you ordered your replacement tail light from Go-Parts, it will include new bulbs. All you must do is unplug the wiring harness from the back of the bulb sockets and move onto the next step.

Step 3: Using the 8mm socket, remove the 4 nuts that hold the tail light assembly in place.

Three are located around the casing, with the fourth being in the recessed area beside it.

Step 4: Remove the tail light casing from the vehicle.

Step 5: Place the new assembly in place and replace the bolts that secure its position.

Step 6: Reconnect the wiring harnesses to power the tail light.

Step 7: Replace the thumbscrew that holds the trunk liner in place.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001 Nissan Altima Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
10 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.