Start Here

How do you Change, Replace, or Install Broken 1998-2002 Honda Accord Radiator Cooling Fan Replacement

Fits years: 1998, 1999, 2000, 2001, 2002

All Honda Accord Cooling Fans for sale Tools required:
  • 10mm socket/ratchet

  • Flathead screwdriver

Step 1: Disconnect the coolant overflow hose from the radiator.

Step 2: Disconnect the cooling fan's wiring harness.

Step 3: Pull the wiring bundle that runs along the top of the radiator free of the small plastic clips that hold it to the radiator.

Step 4: Loosen and remove the two 10mm mounting bolts that secure the cooling fan to the radiator.

Step 5: Lift and remove the coolant overflow reservoir.

Step 6: Loosen and remove the 10mm bolts (2) that secure the radiator to the vehicle frame.

This step frees up some space for us to remove the fan assembly!

Step 7: You can now lift and remove the cooling fan assembly.

This may take a bit of maneuvering, as there isn't much space.

Step 8: Mount the new cooling fan assembly by tightening the two 10mm mounting bolts.

NOTE: Use the small tabs at the bottom of the assembly to ensure proper placement and installation.

Step 9: Tighten the radiator's 10mm mounting bolts (2).

Step 10: Secure the coolant overflow reservoir, and reattach the small hose to the radiator.

Step 11: Connect the cooling fan's wiring harness.

Step 12: Reattach the wiring bundle clips that secure the wiring to the radiator.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Honda Accord Cooling Fans Replacement Instructions

Average Rating: 5 of 5 stars
43 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.