Start Here

How do you Change, Replace, or Install Broken 1998-2002 Lincoln Town Car Tail Light Replacement

Fits years: 1998, 1999, 2000, 2001, 2002

All Lincoln Town Car Tail Lights for sale Tools required:
  • 11mm wrench

Step 1: Open the vehicle's trunk.

Step 2: Loosen and remove the hand-screw that holds the trunk liner in place (over the tail light mounting area).

Step 3: Remove the three 11mm mounting bolts that secure the tail light to the vehicle.

Step 4: You can now remove the tail light.

Step 5: Disconnect the wiring harness that attaches to the back of the tail light assembly.

NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not include bulbs, simply turn the sockets counter-clockwise, remove them from the old tail light, and attach them to the new one. This process only takes a few moments!

Step 6: Connect the wiring harness to the new tail light assembly.

Step 7: Mount the new taillight by tightening the three 11mm mounting bolts.

Use the guiding tabs on the assembly to ensure proper placement.

Step 8: Cover the mounting area with the trunk liner and secure it by tightening the hand-screw.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Lincoln Town Car Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
52 Review(s)

Let your friends know this guide can help them!

© 2015 GO-PARTS. All Rights Reserved.