Start Here

How do you Change, Replace, or Install Broken 1998-2003 Dodge Durango Tail Light Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003

All Dodge Durango Tail Lights for sale Tools required:
  • Phillips screwdriver

Step 1: Open the vehicle's rear door.

Step 2: Remove the 2 Phillips screws that hold the tail light in place.

These screws are exposed by opening the rear door, and are just inside the tail light's position.

Step 3: You can now remove the tail light.

Step 4: Disconnect the wiring harness from the tail light assembly.

NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not include new bulbs, simply turn the sockets counter-clockwise, remove them (with the wiring) from the old assembly and attach it to the new one. This only takes a few moments!

Step 5: Connect the wiring harness to the new tail light assembly.

Step 6: Mount the new tail light by using the guiding pins to ensure proper placement and securing the assembly by tightening the 2 Phillips screws.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003 Dodge Durango Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.