Start Here

How do you Change, Replace, or Install Broken 1998-2004 Dodge Intrepid Alternator, Power Steering Belt Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003, 2004

All Dodge Intrepid Alternator for sale Tools required:

  • 15mm wrench

  • 13mm socket/ratchet and a long extension

Step 1: Open the vehicle's hood.

Step 2: Locate the belt routing diagram, which is usually located near the radiator, on the UNDERSIDE of the hood, or in the owner's manual.

Step 3: Turn the 15mm bolt (1) on the belt pulley (near the radiator) COUNTER CLOCKWISE. You need to loosen this pulley a FEW turns to release some of the tension on the belt.

NOTE: You may need to use a second wrench to add leverage, as the space is a little cramped.

Step 4: Loosen the 13mm belt tensioner bolt (1) using the ratchet with a long extension.

Step 5: Once the tension is released from the belt, you can remove it from the vehicle.

Step 6: Using the routing diagram we found in Step 2, route the belt around the proper pulleys.

Step 7: Once the belt is in place, tighten the 13mm belt tensioner bolt (1).

NOTE: The belt should be taut, but not overly tight or stretched!

Step 8: Tighten the 15mm bolt (1) to complete the tensioning of the belt.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Dodge Intrepid Alternator Replacement Instructions

Average Rating: 4.8 of 5 stars
26 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.