Start Here

How do you Change, Replace, or Install Broken 1998-2005 Chevrolet S10 Parking / Signal Light Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

All Chevrolet S10 Turn Signal Lights for sale Tools required:
  • None

NOTE: If you are replacing your blinker/parking light assembly due to wear or damage, you may want to replace the headlight assembly, as well. You will be removing it, and it will never be easier than it is during this project!

Step 1: Pull up on the two retaining tabs located just behind the headlight assembly.

Step 2: Disconnect the wiring harnesses from the back of the headlight assembly and remove it from the vehicle.

Step 3: Depress the retaining tabs located to each side of the assembly and pull it from the vehicle.

Step 4: Disconnect the wiring harness on the back of the parking light/blinker assembly.

NOTE: If your new parking light/blinker assembly includes bulbs, you can simply connect the wiring harness and install it. However, if it doesn't, simply turn the socket counter-clockwise to remove it from the old assembly and insert it into the new one.

Step 5: Connect the wiring harness to the new parking light assembly.

Step 6: Secure the new parking light by re-engaging the two retaining clips.

Use the tabs on the back of the assembly as your guides. You will some of them snap into place, while others act simply as your guides.

Step 7: Reattach the headlight assembly by reconnecting the wiring harnesses and securing it by re-engaging the retaining tabs.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Chevrolet S10 Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
18 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.