Start Here

How do you Change, Replace, or Install Broken 1999-2005 Pontiac Grand Am Headlight Replacement

Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005

All Pontiac Grand Am Headlights for sale Tools required:
  • Pliers

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Using the flathead screwdriver, pull up on the center of the retaining clips (located on top of the assembly) and disconnect them.

Step 2: Lift the plastic cover.

Step 3: Locate the retaining tabs and disengage them using your pliers.

You'll want to pull "back" and then "up and out".

Step 4: Pull the headlight assembly from the vehicle.

Step 5: Disconnect the wiring harness from the old headlight assembly.

NOTE: If you ordered your replacement headlight from Go-Parts, it may come with all of the bulbs. This will help you save steps, as you won't have to unscrew the sockets from the old assembly.

Step 6: Using a screwdriver, adjust the new headlight assembly.

Match the screw stems to meet the length of the stems on the old assembly. This will keep your beams adjusted at the proper height.

Step 7: Connect the wiring harness to the new headlight assembly and insert it into position.

You'll want to line up all of the pegs to ensure proper placement. The adjustor will fit perfectly into position, as well. Insert the interior side of the light (when facing it from the front of the vehicle) first.

Step 8: Reattach the retaining tabs to hold the new assembly firmly in place.

Step 9: Replace the plastic cover.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Pontiac Grand Am Headlights Replacement Instructions

Average Rating: 4.8 of 5 stars
24 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.