Start Here

How do you Change, Replace, or Install Broken 1999-2005 Pontiac Montana Headlight Assembly Replacement

Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005

All Pontiac Montana Headlights for sale Tools required:
  • Pliers

Step 1: Open the vehicle's hood and remove the 3 wing-nuts holding the headlight assembly in place.

IF the wing-nuts are tightened more than "hand tight", use the pliers to get enough leverage to loosen them.

Step 2: The headlight assembly will now pull straight out from the vehicle frame.

Step 3: Disconnect the electrical plug to completely remove the existing headlight assembly.

Step 4: Connect the electrical plug to the new headlight assembly.

Step 5: Align the pegs on the headlight assembly with the corresponding openings beneath the assembly position, and put the new assembly in place.

Step 6: Re-align the blinker and wing-nut pegs to ensure proper placement.

Step 7: Tighten all of the wing-nuts to ensure that the lighting assembly is not "loose" in any way.

Finger-tight is perfectly acceptable for the wing-nut tightness.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Pontiac Montana Headlights Replacement Instructions

Average Rating: 4.8 of 5 stars
32 Review(s)

Let your friends know this guide can help them!

POPULAR GUIDES RELATED TO: Pontiac Montana Headlights


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.