How do you Change, Replace, or Install Broken 1999-2006 GMC Sierra Corner Light / Turn Signal Replacement
Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
NOTE: If you are replacing the turn signal assembly due to collision damage, it may be a good idea to replace the headlight assembly, as well. In this project, we will be removing the headlight, so it will never be easier to replace than right now!
Step 1: Open the vehicle's hood.
Step 2: Twist, lift, and remove the two mounting tabs that secure the headlight in place.
Step 3: Pull the headlight out and disconnect the wiring harnesses attached to the back of the assembly.
Step 4: Depress the retaining lever (located to the outer edge of the parking light), and pull the assembly through the front of the vehicle.
Step 5: Twist and remove the bulbs/sockets from the parking light assembly.
Step 6: Insert the bulbs/sockets into the new parking light, and mount it by engaging the retaining clip.
Insert the inner tab first, and then snap the assembly into place.
Step 7: Reconnect the wiring harnesses to the headlight assembly, and secure it by re-engaging the mounting tabs.
99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006 GMC Sierra Replacement Instructions