Start Here

How do you Change, Replace, or Install Broken 2000-2002 Dodge Neon Headlight Replacement

Fits years: 2000, 2001, 2002

All Dodge Neon Headlights for sale Tools required:

  • 8mm OR 10mm socket/ratchet with extension (depending on model year)

  • Flathead screwdriver

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the 10mm bolts (3) that secure the headlight assembly to the vehicle.

The bolt size may vary, depending on your model. Two bolts are located on TOP of the assembly, while the final bolt is located just to the interior of the turn signal (inside the grille).

Step 3: You can now pull the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses (2) from the BACK of the assembly.

NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new sockets/bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply TWIST the sockets COUNTER CLOCKWISE to remove them from the assembly.

Step 5: Connect the wiring harnesses (2) to the new headlight assembly.

Step 6: Mount the headlight to the vehicle by tightening the 10mm bolts (3).
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002 Dodge Neon Headlights Replacement Instructions

Average Rating: 4.8 of 5 stars
32 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.