Start Here

How do you Change, Replace, or Install Broken 2000-2002 Mercury Grand Marquis Serpentine Belt Replacement

Fits years: 2000, 2001, 2002

All Mercury Grand Marquis for sale Tools required:

  • 3/8 Drive ratchet handle

Step 1: Open the vehicle's hood.

Step 2: Insert the square peg of the 3/8 drive ratchet handle into the opening on the belt tensioner. Turn the tensioner CLOCKWISE, releasing the tension on the belt. Once you remove the belt from the vehicle, SLOWLY release the tensioner back to its resting position.

Step 3: Using the routing diagram posted near the radiator, on the UNDERSIDE of the hood, or in the owner's manual, route the belt around the proper pulleys.

Step 4: With the belt now in place, use the 3/8 drive ratchet to turn the tensioner COUNTER CLOCKWISE, increasing the tension on the belt.

NOTE: The belt should be taut, but not stretched or overly tight!
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002 Mercury Grand Marquis Replacement Instructions

Average Rating: 4.8 of 5 stars
46 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.